Required Software

To program the controller, you must use our BACDoor™ software. Two interfaces exist to program your controller, as described below. Both share the same backend, so don’t worry. You can jump between the various programming interfaces, the controller does not differentiate.

Option 1 – PC BACDoor™

This interface requires the controller to be connected via USB to your computer for the software to communicate with the controller. This the most powerful interface, but is also the least user-friendly.

You must be an administrator to install the software. PC BACDoor™ cannot be installed from network locations. Supported OS – Windows Vista, Windows 7, Windows 8, Windows 8.1 (both 32 and 64 bit) Regional settings should be US English Internet access may be required if .NET needs to be updated For additional support, please contact: support@accelerated-systems.com 

See Using BACDoor PC for more information. Then proceed to Getting the motor spinning sensorlessly – eMobility.

Option 2 – Mobile BACDoor™

Mobile BACDoor™. This interface accesses Bluetooth-capable controllers via Bluetooth from your Android or IOS device. This method allows you to program and tune your application wirelessly. This interface is slightly more intuitive than PC BACDoor™. At this time, reading the manual is required to use and navigate both access interfaces.

Option 2a: BACDoor™ 2.0 for Apple iOS 8.0 or later devices: https://itunes.apple.com/us/app/bacdoor-2-0/id1229140415?ls=1&mt=8

Option 2b: BACDoor™ 2.0 for Android 5.0 and up: https://play.google.com/store/apps/details?id=com.accel_droid.asi.bacdoor

See Using BACDoor 2.0 Mobile for more information. Then proceed to Getting the motor spinning sensorlessly – eMobility.